|
| Without antennas and outdoor cover: 114.5 x 93.6 x 32 mm (4.5 x 3.7 x 1.3")
With antennas: 213 x 93.6 x 32 mm (83 x 3.7 x 1.3")
With antennas and outdoor cover: 217 x 94 x 32 mm (8.5 x 3.7 x 1.3") |
| Device: 360 g (12.7 oz)
Device with outdoor cover: 395 g (13.9 oz)
DIN rail/wall mounts: 25 g (0.9 oz) |
| |
| Wall/pole mount: polycarbonate
DIN rail mount: polycarbonate |
| 1–2" on pipe outer diameter |
| 38.8 N at 200 km/h (8.7 lbf at 125 mph) |
| Device with outdoor cover: IP66 |
|
| |
| (2) GbE RJ45 ports
LTE Category 4 radio
WiFi 4 |
| (1) PoE input
(1) PoE output* (Max. 10W)
*Requires a PoE+ switch. |
| UniFi PoE switch (48—54V DC)
USB Type-C (5V DC)
4-pin* ATX DC power socket (9—30V DC)
*Pin 1 for Power + and Pin 2 for Ground –. Please refer to the Installation Guide for detailed power socket pinout. |
| |
| |
| |
| |
| Download 150 Mbps / Upload 50 Mbps
*Speed depends on network coverage and performance at the device location. |
| 802.11 b/g/n, WiFi 2.4G, 20/40 MHz |
| |
| |
| |
| (1) Mobile 1: SMA female connector, supports 1Tx and 1Rx
(1) Mobile 2: SMA female connector, supports 1Rx only
(1) GPS: SMA female connector
(2) WiFi: RP-SMA female connectors
Note: Ensure all SMA / RP-SMA connectors are secured with antennas or the provided caps to maintain weatherproofing. |
| (2) Mobile/LTE antennas with SMA male connectors
(1) GPS antenna with SMA male connector
(2) WiFi antennas with RP-SMA male connectors |
| |
| |
| DIN rail/wall/pole mount (Included) |
Ambient operating temperature | -40 to 70° C (-40 to 158° F) |
Ambient operating humidity | |
| |
Supported WiFi Data Rates |
| |
| 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 6.5 Mbps to 300 Mbps (MCS0 - MCS7, HT 20/40) |
