|
| 174.9 x 126 x 32.9 mm (6.9 x 5 x 1.3") |
| |
| |
| |
|
| |
| PoE++
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU |
| Without PoE output: 30W
With PoE output: 50W |
| |
| PoE passthrough, (4) PoE, 50V DC, total 20W |
| |
| |
| Request to exit/request to enter/remote release/door position sensor |
| Lock: 30V DC, 1A
Aux: 30V DC, 1A |
| Lock: 12V DC, 1A
Aux: 12V DC, 0.33A
12V DC, 0.33A |
Recommend max. cable length |
| Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable. |
| |
Ambient operating temperature | 0 to 40° C (32 to 104° F) |
Ambient operating humidity | |
| Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I |
| Compliance with IEEE 802.3 (at or af) specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits. |
| |
| CE, FCC, IC, UL 294, CAN/ULC-60839-11-1 |
Document number, and issue date and/or revision level | |
